Mining and Construction Service Equipment

2. Micro Trenching MachineOur micro trenching machines are mainly used for trench digging, cable lying and material transport in open-pit mines. The chassis of the micro trenching machine is entirely imported from world's well-known suppliers. Available choices include the skid-steer loader of GEHL V420 and Bobcat S770.
2. Mining Vehicle Washer TruckMining vehicle washer trucks are a type of maintenance equipment for mining vehicles. They are usually used to wash away the mineral dusts, mud and oil dirt on the mining vehicles by spraying high-pressure water fluids.
2. Mining Lube TruckA mining lube truck is a mobile lubricant refueling station. The lube truck of JC-Hydraulic is mainly used to replenish lubricants, hydraulic oils, antifreeze and other fluids for various heavy-duty equipment and construction vehicles around open-pit mines.
2. Cable Reel TruckCable reel trucks are designed for cable handling and laying in electricity supply system of open-pit mines. JC-Hydraulic has developed the latest cable reel trucks by accounting for the power supply demands of heavy-duty mining equipment and learning from outstanding designs at home and abroad.
2. Blasthole Dewatering TruckBlasthole dewatering trucks are specialized equipment mainly used to discharge water and mud slurry left in blastholes so as to make the holes qualified to be fed blasting materials. The truck’s discharging function is hydraulically driven by the power take off (PTO) at the chassis, involving hydraulic arm, submersible pump and hose roller.
2. Mining Service TruckMining service trucks are often used for onsite welding and repairing of mining vehicles and equipment. The mining service trucks can also offer temporary gas supply, low-voltage electricity supply and repairing space for the convenience of welding and maintenance. Mobility of the vehicle makes its service easier.
2. Emergency Power Supply TruckEmergency power supply truck is made up of the Nanjing IVECO vehicle chassis, a small electricity generator set, quick chargers, battery bank and other components. The emergency power supply truck is mainly used as a backup power supply for mining and construction equipment to generate them easily in winter.
2. Engine Pre-heating TruckJC-Hydraulic engine pre-heating truck is a preheater applied to warm up the engine of heavy-duty transport vehicles of open-pit mines in winter. Preheating the engine will make the engine generation easier and protect the engine itself and other moving parts. The preheating truck is made up of a box van, a diesel-powered heating system, a control system, an electricity generation mechanism, hot air ducts and a remote infrared thermometer.
2. Tire Service Truck (Tire Handler)JC-Hydraulic tire service truck is designed for tire transport and maintenance for large mining and construction vehicles. The tire handler adopts a high-strength steel structure to adapt to harsh mining environments. The truck mainly consists of a jib, a tire handling arm, a large-capacity air compression system and a number of options.
2. Mine Stemming LoaderJC-Hydraulic mine stemming loaders are wheel loaders equipped with stemming buckets to stem blast holes on mine sites. The double-arm scraper installed on the truck front is hydraulically driven to stem blast holes while opening and closing. By far, our stemming loaders have been widely applied in open-pit mines at home and abroad.
2. Mining Lowboy TrailerJC-Hydraulic mining lowboy trailers have two types, fuel-powered and electricity-powered. The fuel-powered mining lowboy trailer can bear 60-120 tons of loads and is mainly used as a welding platform for large structure components or as a component transport vehicle.

2. Mining Shovel Lifting System The mining shovel lifting system can also monitor the cylinder’s location and pressure to help complete the loading tasks safely and easily regardless of load weights and sizes. A single power system can control up to eight single or double-acting cylinders or several cylinder sets. The pressure sensor can set pressure or loading limits for each or all of the cylinders.
2. Haul Truck Wheel Motor Rotation Station JC-Hydraulic haul truck wheel motor rotation station is often used to remove or install electric wheel motors. Wheel motors on the rotation station can move up and down along the axis and realize self-rotation. The movement or rotation can be stopped at any time for the convenience of the removal or installation.
2. Haul Truck Wheel Motor Lifting Platform JC-Hydraulic wheel motor lifting platforms are used to remove or install electric wheel motors on large trucks. The platform mainly consists of the fixation table, hydraulic pump station, the chassis, clamping tools and other parts. The lifting table needs to work with the 30 ton forklift and uses the hydraulic control system to move wheel motor.
2. Pit JackPit jacks are auxiliary equipment used to lift large mining vehicles from off the ground for the convenience of tire replacement and chassis maintenance. The jack independently developed by JC-Hydraulic consists of the hydraulic pump station, the hydraulically and electrically controlled operation chamber, two jacks, the concrete pit base and the sewage system.
2. Mobile Mining Jack JC-Hydraulic mobile mining jacks can electrically or pneumatically lift 60t, 100t, 150t or 200t weights of mining vehicles. The jacks are used for chassis supporting when repairing electric dump trucks.
2. Tire Repair Stand Tire repair stands are essential auxiliary equipment assisting with tire repair and maintenance of heavy-duty transport vehicles on open-pit mines. The stand is made up of the base structure, the lifting arm, the electric dual-drive roller, etc. JC-Hydraulic’s tire repair stand can be applied to tires with the maximum diameter of 4,100mm.
2. Forklift-Mounted Earthmoving Blade Manipulator The forklift-mounted earthmoving blade manipulator developed by JC-Hydraulic is an electric forklift equipped with the blade manipulator, the electromagnetic sucker, a monitoring system and a remote control mechanism. The manipulator can be used to assemble or dismantle earthmoving blades of heavy-duty bulldozers, loaders and graders.
2. Tire Manipulator JC-Hydraulic tire manipulator is designed for tire assembly and disassembly of large mining and construction vehicles. The handler can be used to assemble, dismantle or rotate huge tires and has a function of side shift. Our company’s standard or non-standard manipulator can be chosen from to work with customers’ loaders or forklifts to meet their various operation demands.
2. Cylinder HandlerJC-Hydraulic cylinder manipulator is applied to install or dismantle front and rear suspension cylinders and hoist cylinders of open-pit mining dump trucks. The manipulator chassis comes from overseas telehandlers’ brands. Its compact structure and mobility enables it to handle cylinders in limited space close to mining vehicles, boosting the handling efficiency and saving the labor and material costs.
2. Undercarriage Track Repair & Rebuilding EquipmentUndercarriage track repair and rebuilding equipment is a set of track maintenance line independently developed by JC-Hydraulic and applying advanced foreign maintenance solutions. The equipment is designed to repair and rebuild large bulldozers’ undercarriage tracks for Caterpillar, Komatsu and other brands.
2. Dozer Track AdjusterJC-Hydraulic dozer track adjuster is often applied to the imported OEM bulldozer’s track undercarriage. It is suitable to handle track undercarriages of Caterpillar or Komatsu’s large bulldozers. The track tensioner is developed and manufactured independently by ourselves after learning from the advanced foreign track undercarriage technological solutions.
2. Engine Repair StandJC-Hydraulic engine rotation stand is used for backup engine maintenance and transport in overhauling processes of disassembly, washing, testing and installation. It is often applied to Cummins engines. The stand can rotate the engine by 360 degrees towards any direction for the convenience of the engine assembly or disassembly.

JC-Hydraulic is a dedicated company with focus on the development and production of mining service vehicles and hydraulic cylinders. Our mining service vehicles are built for the service operations in the mining industry, aiming at minimizing equipment downtime, improving working efficiency and boosting productivity. The company is also known as a reliable manufacturer of hydraulic cylinders which can be used as cost-efficient replacement cylinders in mining equipment and construction machinery of many global renowned heavy equipment manufacturers, such as Caterpillar, Komatsu and Terex. JC-Hydraulic is your dependable one-stop source for the open-pit mining industry.

Products